jeep help.
Thread Starter
Newbie
Joined: Dec 2009
Posts: 2
Likes: 0
From: Cold Lake Alberta
Year: 1992
Model: Cherokee
Engine: 4.0L
i have a 1992 jeep cherokee 2 door auto and a pit a 4 inch lift kit in it but i now have a death wobble in the front end if i do around or over 80km/h any sudjestions???
CF Veteran
Joined: Jul 2009
Posts: 2,158
Likes: 11
From: Chico,ca
Year: 89
Model: Cherokee
Engine: 4.0
Did you install an adj track bar or at least relocate your stock one?and did you install lower adj control arms,either one of these will cause death wobble if not installed,reasons are the track bar allows you to recenter your axle,and the control arms allow you to keep your caster at +7 degrees,when you lift it it wants to go towards 0 and that will cause death wobble,bushings,ball joints will contribute also.
Thread Starter
Newbie
Joined: Dec 2009
Posts: 2
Likes: 0
From: Cold Lake Alberta
Year: 1992
Model: Cherokee
Engine: 4.0L
The lift came with a bracket to lower the trak bar and also came with a pair of lower control arms so they are on the truck. I welded the trac bar bracket thinkin that might work but nope no luck. I have had the wheels balenced but not sure about the allignment on it. Guess I could try that....
Thread
Thread Starter
Forum
Replies
Last Post
pyrogen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
Aug 26, 2024 02:04 PM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 29, 2015 06:42 AM
mboudreau001
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 26, 2015 04:37 AM
sl0flyer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 23, 2015 12:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



