Jeep died randomly
My XJ died yesterday after I accelerated hard from a stop. The tach stayed at 4k for a few seconds after it died. When I tried to start the Jeep after it died I noticed the fuel gauge and volt gauge didn't work but the Jeep would crank. After unplugging connectors and checking fuses under the hood, still nothing. The run/start/drl fuse blew in the kick panel. What/where should I check so the fuse doesn't blow again?
This is a 1999 with a 4.0l with 108k miles
This is a 1999 with a 4.0l with 108k miles
Last edited by ChitownCraig; Dec 7, 2014 at 10:30 PM.
CF Veteran
Joined: Jan 2012
Posts: 3,170
Likes: 312
From: Australia
Year: 1997 (RHD)
Model: Cherokee (XJ)
Engine: 4.0 ltr
welcome to the forum.
you have access to wiring diagrams? In case not, CCKen is good with those things. You might want to contact him....or wait until he finds this thread
you have access to wiring diagrams? In case not, CCKen is good with those things. You might want to contact him....or wait until he finds this thread
Thread
Thread Starter
Forum
Replies
Last Post
XJ ONLY
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Jan 26, 2019 06:30 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Aug 25, 2015 11:50 AM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 22, 2015 01:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



