jeep 4.0
#2
Member
Join Date: Oct 2008
Location: New Hampshire
Posts: 181
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
just my 2 cents.
I would strip the block down and bring it to your local machine shop. They will spec out the journals and bearings so you know what size to buy. I wouldn't buy any without knowing what size to buy. I used to get my rebuild kit from summit racing, but that was always for High Performance Chevy's. Not sure how they handle 4.0L's
But definitely get things spec out first....
Thanks,
J
I would strip the block down and bring it to your local machine shop. They will spec out the journals and bearings so you know what size to buy. I wouldn't buy any without knowing what size to buy. I used to get my rebuild kit from summit racing, but that was always for High Performance Chevy's. Not sure how they handle 4.0L's
But definitely get things spec out first....
Thanks,
J
#3
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
I always get them from the same machine shop that does the machine work for me,they can make sure everything is right and I have found there prices are better. If you do have an issue they will correct it right away.
#4
Newbie
Thread Starter
Join Date: Feb 2010
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
im def going to strip the block down. im pretty sure they will have to turn the crank, resize the rods, and i will have it bored out just because theres no reason not too when you have it torn down that far. I was looking for some websites that have good rebuild kits at a reasonable price. i will wait for the specs to come back from the machine shop before ordering of course.
Thread
Thread Starter
Forum
Replies
Last Post
twofrenchbraiddlady
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-01-2015 02:13 PM
Brynjaminjones
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-22-2015 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)