Figured I'd post this while I'm searching. I'm installing an Iron Rock Offroad 4" shortarm lift. First off my track bar wasn't lining up with the new hole I drilled. Jacked up one side of the axle got the track bar bolt in, now driver side sway bar is not aligned straight up and down. I'll see if I can post pics.

 

Controll arm bracket. FYI all Controll arm bolts are loose. Passenger side straight up n down driver side at an angle. Also after I got the tracking bar bolt in the passenger side sway bar wasnt aligned so I had to jack axle to get it aligned

 

forgot last pic

 

Really?! Good thing I didnt wait for an answer. I guess it's normal...?!

 

stock control arms? on a 4inch lift? thats pushin it

 

nope that aint normal you need a track bar relocation bracket it looks like this

 

Cool thanks. Ya in the directions it just said to drill a new hole,. Thanks for the info, I'll start lookin

 

you should use these also since you are using stock control arm the track bar centers you axle under xj the control arms center your axle in the fender wells

 

Excuse my ignorance but what is that kit? This is the first lift I've installed so I'm pretty new at this.

 

which one the top one goes where you drilled the hole for track bar the second bolts to the frame where your control arm bolt now lowering them sinse you raised the frame you should lower the brackets or get longer adj control arm the brackets are cheaper and retains stock angle setting

 

last one you posted

 

go back one post i add to it

 

Cool thanks alot for the info

 

i have them with 9 inch coils the work great

 

Damn thats pretty cool