Injector help...
Trending Topics
CF Veteran
Joined: Jun 2011
Posts: 2,858
Likes: 1
From: Nor-Cal
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Originally Posted by Spunkmeyer
A car-be-que.
Last edited by Slick761; Aug 19, 2011 at 05:44 PM.
Seasoned Member
Joined: Jun 2011
Posts: 287
Likes: 2
From: Catasauqua PA
Year: 1996
Model: Cherokee
Engine: 4.0
Originally Posted by Slick761
Haha... fuel injection runs between ~30-~50 psi. If the o-rings fit snug as they should and the length is correct you will not get a car b Que (still laughing at that term)... however if you have injectors that are 19lb/hr @39psi and you put in injectors that are 19lb/hr @49psi they will not have enough.flow at 39 psi and will choke the engine. There's a chart floating around with conversions. Op if you do try those be very careful not to knock off a pintle cap in the intake. Its easy to do. Also be sure the measurements are right. There are lots of ev1 injectors that fit.703s are def. Most popular. How do you think someone found out those work? Just be cautious and look for leaks. I would feel comfortable trying it. Although I drove my mustang 10 miles with a broken float and gas all over the engine. A little gas on a cold engine isn't going to start a fire. Obviously if it leaks don't do what I did, don't drive around like that..... I was young and dumb and had to get home.

Here's what ya need!
CF Veteran
Joined: Jun 2011
Posts: 2,460
Likes: 0
From: Dayton, Ohio
Year: 1992
Model: Comanche
Engine: 4.0
Not a plug, just trying to help..
these are the stock ones vs the neons you will need. those are not even close
Edit: forgot the link:
https://www.cherokeeforum.com/f11/oe...ectors-100880/
these are the stock ones vs the neons you will need. those are not even close
Edit: forgot the link:
https://www.cherokeeforum.com/f11/oe...ectors-100880/



