I'm removing the door panel and need some help
Thread Starter
Junior Member
Joined: May 2011
Posts: 54
Likes: 2
From: Colorado Springs, CO
Year: 2000
Model: Cherokee
Engine: 4.0L I6
How do I get the rods off of the door handle and the door lock. ive got the ring for the door handle and lock off from around the interior but it looks like mine is pop riveted in place. anywho heres a top down picture of the rods in question.
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Remove the 5 screws. Pull the panel off. There are 2 tabs on the inside of the door handle and the door lock tab (one on each). Flip them open/off of the rods pull the rods of of the hole. Disconnect widow switch harness, if applicable. Botta boom botta bing
2. Did you see the link graciously posted by Freegdr? I made it bigger! Much easier to click on, IMO.
Thread
Thread Starter
Forum
Replies
Last Post
John T
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Feb 19, 2022 11:27 AM
Bookspans
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Mar 17, 2021 07:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



