So i've searched this forum, jeep forum and google.

I've seen one resolution but he said he got lucky while fooling around with fuses and it makes no sense to me.

My Turn Signals DO Not work, my hazards work, underneath the dash, there is no flashers and never was, there's a circular thing and its for the light around where the key goes in the sterring column, i've replaced the blue square underneath the dash right below the steering wheel, checked all fuses underneath dash and also underneath hood, not one is blown.

I hear the click when i try and use them but i hear no noise like they are blinking and see nothing blinking.

Has anyone had this problem before?

 

what year xj is this??????

 

By his picture I would say it is a 1997 or later.

 

That's def a pre '97. look at the ft side markers.

Should be a flasher for signals in fuse box under dash. the hazzard has a separate flasher

What year?

 

fues box by left foot

 

It's a 95, and I already checked all fuses, no problems with any

 

not fuses the round flasher units,switch the flasher one with the turn signal one see if they work if so go buy new one

 

Never had any to begin with

 

Moved that red wire to the accy slot

 

dont no what year they swithced to the combo flasher unit have you replaced that

 

Where Is the combo at, and if it's combo how come my hazards work and signals don't lol

 

I just went and looked at my 95 and the flashers are to the right of the steering column looking up

 

The blue thing ? Ive tried 3 different ones I pulled from the JY

 

huh....let me do a little more checking for you....brb

 

turn on the turns do any of the relays click on here