Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

IAC question

Thread Tools
 
Search this Thread
 
Old 08-10-2017, 12:08 PM
  #1  
Junior Member
Thread Starter
 
peabody's Avatar
 
Join Date: May 2015
Location: Marietta , Ga.
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: I6
Default IAC question

!998 xj with 4.o ,auto, 4x4

I hydrolocked the motor . Removed plugs and blew the water out . Changed oil and filters twice . Cleaned out air box and changed air filter . Cranked right up .
Now it won't idle unless gas pedal is depressed . Pulled throttle body and cleaned IAC . Still no idle .
The battery is good . The tps is only 2 years old . Is there another cause I should look for and is there a way to diagnose if the IAC is bad ?

THanks
Old 08-11-2017, 01:04 AM
  #2  
CF Veteran
 
fb97xj1's Avatar
 
Join Date: Dec 2015
Location: PA
Posts: 3,038
Likes: 0
Received 333 Likes on 277 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

Hydrolocking can get expensive. Have you checked for any bent pushrods? How deep were you? TPS may have gotten wet, which it does not like. At all. TPS, IAC, CPS, even the injectors. Have you checked compression? Was it mud? The cat and O2 sensors are probably shot on top of whatever else is going on.

Last edited by fb97xj1; 08-11-2017 at 01:07 AM.
Old 08-11-2017, 06:50 AM
  #3  
CF Veteran
 
BlueRidgeMark's Avatar
 
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes on 767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
Default

Have you disconnected all your sensors and cleaned the contacts?
Old 08-11-2017, 01:56 PM
  #4  
CF Veteran
 
DFlintstone's Avatar
 
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes on 17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Default

Originally Posted by fb97xj1
TPS may have gotten wet, which it does not like. At all.
X2....... 87-90 has a process to adjust it to correct values. There is probably a way to test yours (not adjustable), with a DVM.
Old 08-17-2017, 03:24 PM
  #5  
Junior Member
Thread Starter
 
peabody's Avatar
 
Join Date: May 2015
Location: Marietta , Ga.
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: I6
Default

Ok . I cleaned all connections with elec cleaner spray . No difference . Now I have a new IAC on order . Hope $60 fixes this .
Old 08-17-2017, 09:12 PM
  #6  
CF Veteran
 
BlueRidgeMark's Avatar
 
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes on 767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
Default


Firing the parts cannon.
Old 08-22-2017, 10:18 AM
  #7  
Junior Member
Thread Starter
 
peabody's Avatar
 
Join Date: May 2015
Location: Marietta , Ga.
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: I6
Default

The parts cannon was dead on . A new AIC and it's alive . Thanks for the help folks . Probably didn't hurt to clean all the contacts too .
Old 08-22-2017, 01:27 PM
  #8  
CF Veteran
 
EEVEE's Avatar
 
Join Date: Apr 2014
Location: Florida
Posts: 1,180
Received 56 Likes on 41 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
Default

wish i can randomly spend 60 bucks like that with confidence lol.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:07 PM.