I finally had enough of the 007 smoke screen pouring out the back of my '94 ... not to mention the smell. I hated being "that guy" on the highway !

So I took a couple days to get it all done ... Few Pics:
-
-
I first started at the filter, and did the conversion ....-
-

-

-

-
Made a tool ...
-

-

-

-
Installled stud off of adapter with RED locktite ...
-

-
On goes filter....
-

-

 

Next came the oil pan, main seal, and exhaust ....
-
-
Just realized, I didnt take a million pics like I normally do for my other builds ... anyway, here's a few:
-
-
Pulled wheels off to get Jeep lower on lift, so I can easily lean over with the big belly ...
-

-

-

-

-

-
-
I got the rear main replaced, a new one piece gasket, welded up the cracks, and also did the valve cover as well (not too much seepage there)
-
-
All the vacuum lines/elbows are so fricken brittle on this thing .... Any idea where I can get new Elbows for the Valve Cover ??
-
-
I epoxyed some steel flares on there for now, but would like some stock ones.
-
-
Next up, is cure the Cat Converter rattle, and install a Flow ....

Later

 

Nice job man!!