I need someone with a stock XJ to help me out.
Thread Starter
Senior Member
Joined: Jun 2009
Posts: 842
Likes: 2
From: Guilderland NY
Year: 2001
Model: Cherokee
Engine: 4.0L I6 w/ K&N and bored TB
Does someone have a measuring tape, a stock XJ thats not sagging alot, and want to be a big help and get a nice thank you.
I've never gauged that exact amount of lift I have and I feel like doing it now.
So if you could please measure, in front the center of the front wheel to the little crease on the fender above the flare.
And in back the center of the wheel to the bottom of the rear window moulding.
Then post said measurements here and i will say thank you.
I've never gauged that exact amount of lift I have and I feel like doing it now.
So if you could please measure, in front the center of the front wheel to the little crease on the fender above the flare.
And in back the center of the wheel to the bottom of the rear window moulding.
Then post said measurements here and i will say thank you.
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
from the top of the axle tube(make sure its the tube and nothing else) to the bottom of the frame rail (again the actual frame rail and nothing else)
stock from factory floor is:
6 3/4" front
6" rear
stock from factory floor is:
6 3/4" front
6" rear
Member
Joined: Jul 2010
Posts: 126
Likes: 0
From: Oregon in the valley
Year: 1992 Laredo
Model: Cherokee
Engine: 4.0 HO
i can tell you in my 92 its got rancho 5000 shocks and seems to ride way lower with my stock susp. and i just put 30-9.5-15 tires on and i have 2-2.5 inchs and they rub if i hit a big enough bump
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Mar 8, 2016 11:33 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 8, 2015 06:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



