Hunting for 8.25 axle in Dallas area...
#1
Member
Thread Starter
Join Date: Jun 2009
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Hunting for 8.25 axle in Dallas area...
Just as title says, anyone know of a good place? found one for 350 with under 100k. I need 3.55 gears, no ABS. 350 just sounds a little steep to me.
I don't want anything special, just stock rear end, going on a DD.
I don't want anything special, just stock rear end, going on a DD.
#2
Registered Users
Join Date: Mar 2009
Location: Pa
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#3
Member
Thread Starter
Join Date: Jun 2009
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
350 is way too much.
I was hoping someone knew of a good jeep yard around the east texas region.
#4
Junior Member
Join Date: Aug 2009
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: '91
Model: Cherokee
Engine: 4.0
You did better than me. I've called from Corsicana to Tyler to Dallas and never found one for less than $450. Mine's a DD and weekend warrior too. I know the D35 ain't the best axle but I figure it'll last me till I luck up on a better axle at a reasonable price.
#6
Member
Thread Starter
Join Date: Jun 2009
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
You did better than me. I've called from Corsicana to Tyler to Dallas and never found one for less than $450. Mine's a DD and weekend warrior too. I know the D35 ain't the best axle but I figure it'll last me till I luck up on a better axle at a reasonable price.
I have over 300k on the d35 and only 200k on the 8.25 ...
#7
Member
Thread Starter
Join Date: Jun 2009
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
i have a dana 35 with the limited slip option and anit lock brakes ill sell...its from a 98
Trending Topics
#9
Member
Thread Starter
Join Date: Jun 2009
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
To bad your not in TN, there is a 95 and a 96 on the local Pull A Part lot with 8.25s under them. You can pull them yourself drum to drum for $100.
#10
Registered Users
Join Date: Mar 2009
Location: Pa
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#11
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
I have 2 D35's sitting on the side of the house..I got em for free basically so I keep em just in case mine goes south. Plus I have 2 sets of axle shafts is needed.
#12
Junior Member
Join Date: Aug 2009
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: '91
Model: Cherokee
Engine: 4.0
Been calling around about a passenger quarter panel window. I can get one for $50, get one off ebay for $40 and see if Oops can get it here in one piece Or have a glass place replace it for me for $90.
With me not knowing jack s%*# about replacing a window guess what I'm leaning towards
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)