Swapping out the LP front from my 2000 and using an HP from a 94. The hubs and rotors are different from one to another. The rotors on the 2000 are twice as heavy but are drilled and slotted, and will fit on the 94, but the 94 rotors are lighter and wont fit on the 2000 hubs (hit the dust sheild). I'm using the axles from the 2000 because of the better joints, should I just swap the hubs and rotors over also, or just swap axles and keep the 94 hubs and rotors on the diff? The 2000 hubs have a much longer flange on them also