How to test TCM connector cavities
#1
Member
Thread Starter
How to test TCM connector cavities
I have seen a couple posts from CCKEN on how to test the cavities on the connector that goes to the TCM.
For example, in this post: https://www.cherokeeforum.com/f2/tra...2/#post3099514.
(BTW: I hope ccken is ok, haven't seen him in ages.)
I was following these instructions, but I could never get any ohm readings at all on the multimeter, for the ground of solenoids or any of them.
Does anyone know what I might be doing wrong?
For instance, cavity 6 to cavity 7 was supposed to show resistance, but it didn't move the meter at all.
Likewise checking cavity 24 for ground.
For example, in this post: https://www.cherokeeforum.com/f2/tra...2/#post3099514.
(BTW: I hope ccken is ok, haven't seen him in ages.)
I was following these instructions, but I could never get any ohm readings at all on the multimeter, for the ground of solenoids or any of them.
Does anyone know what I might be doing wrong?
For instance, cavity 6 to cavity 7 was supposed to show resistance, but it didn't move the meter at all.
Likewise checking cavity 24 for ground.
Last edited by mtyson; 01-09-2018 at 06:37 PM.
#2
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
Have you tried PM'ing Ken? It would be a shame if he's unavailable for whatever reason - his knowledge of the electrical system is absolutely mind blowing.
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
DesertDwella
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
06-13-2018 06:45 AM
Hylander
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-30-2009 02:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)