diesel_87

I really need help trying to figure out how to tell if your 4 wheel drive is completely disengaged or not. I got under my jeep and with someone inside reversing and pulling forward I noticed that my front drive line was turning, and I'm sure if it is supposed to do that when it is supposed to be disengaged. Ok hope to get some help here, thanks! By the way it is a 1989 Jeep Cherokee Laredo 4x4 Thanks!

xjbones

your drive shaft will turn all the time because you do not have selectable hubs!! when your light goes off its out of 4x4....wont do so until your vac-disco is disenguaged

warthog

yes your front drive shaft will turn when in 2wd. if you have any doubts, put it on some dirt and stomp on the gas

xer0

lift one of your front tires up and try turning, if it locks right up 4wd is engaged, if it spins then your n 2wd.

nickjc13

turn your wheel all the way. and let go of the brake. if it turns auto then that means its in 4wd.

96Cherokee

to find out if my 4wd disengaged i stop on some sand and mat it ... if i just peel out then its not in 4wd if i take off like a bat out of hell im in 4wd

thebrow89

x2 but i use gravel

Volcomroofus

x3 but I use pure white sand.. obvious brag post.

xjchris

I hate you. that being said, we should trade houses.

Volcomroofus

Works for me.. I live in a dorm on an air force base.. 8x12.... No kitchen.. Think of a small motel 8 room... If you dont take advantage of being on this island and spend all your time out.. it would suck *** here.