How to replace plastic clutch master cylinder?
Thread Starter
Banned
Joined: Jan 2012
Posts: 415
Likes: 1
From: FL
Year: 2001
Model: Cherokee
Engine: 4.0
How to replace plastic clutch master cylinder?
How to disconnect/connect hydraulic line from master cylinder?
Manufacturer says, both cylinders and line come and replacable as an assambly, but autoparts stores sell master cylinder and slave cyl. separately.
Thanks.
Manufacturer says, both cylinders and line come and replacable as an assambly, but autoparts stores sell master cylinder and slave cyl. separately.
Thanks.
Senior Member
Joined: Apr 2012
Posts: 954
Likes: 1
From: Vegas
Year: 1992
Model: Cherokee
Engine: I6
yup, knock the pin out. I used a socket on the back and hammered the pin out with a nail. then installed the new part. make sure to replace the o ring. once installed hammer the new pin in. or you can use a C clamp to press it in and out if you wanna go that way
Thread
Thread Starter
Forum
Replies
Last Post
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 30, 2015 05:42 PM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
Aug 30, 2015 03:17 PM
JWB37
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 29, 2015 12:03 PM
britishcolumbia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Aug 28, 2015 04:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)