Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

How to remove window crank?

Thread Tools
 
Search this Thread
 
Old Dec 20, 2013 | 05:24 PM
Share
  #1  
PONCHO130's Avatar
PONCHO130
Thread Starter
Member
 
Joined: Nov 2013
Posts: 169
Likes: 0
From: El Valle
Year: 1999
Model: Cherokee
Engine: 4.0
Default How to remove window crank?
Planning on removing my door panel but afraid if I pull to hard on crank I will break something. How should I remove it?
Reply
0
Old Dec 20, 2013 | 05:37 PM
Share
  #2  
prcherokee's Avatar
prcherokee
Senior Member
 
Joined: Mar 2012
Posts: 615
Likes: 0
From: FL.
Year: 2000
Model: Cherokee
Default
I have a piece of a wire clothes hanger 12" long that I bend the tip on one end about 90 degrees,about 1/8" from the end.And with that I can pull the clip.

Reply
0
Old Dec 20, 2013 | 05:42 PM
Share
  #3  
PONCHO130's Avatar
PONCHO130
Thread Starter
Member
 
Joined: Nov 2013
Posts: 169
Likes: 0
From: El Valle
Year: 1999
Model: Cherokee
Engine: 4.0
Default
So it has a clip?
Reply
0
Old Dec 20, 2013 | 05:45 PM
Share
  #4  
prcherokee's Avatar
prcherokee
Senior Member
 
Joined: Mar 2012
Posts: 615
Likes: 0
From: FL.
Year: 2000
Model: Cherokee
Default
Between crank and spacer.
Reply
0
Old Dec 20, 2013 | 05:59 PM
Share
  #5  
Pelican's Avatar
Pelican
Senior Member
 
Joined: Mar 2013
Posts: 691
Likes: 2
From: Texas
Year: 1993
Model: Cherokee
Engine: 4.0L
Default
'99? Varies by year.
Reply
0
Old Dec 20, 2013 | 06:14 PM
Share
  #6  
jaxxj's Avatar
jaxxj
Newbie
 
Joined: Feb 2013
Posts: 20
Likes: 0
From: Jacksonville, FL
Year: 1990
Model: Cherokee
Engine: I6
Default
My 90 has only the plastic ring holding it on. I use a door panel tool to carefully pry it off. I've done this twice and no damage to the crank.
Reply
0
Old Dec 20, 2013 | 06:37 PM
Share
  #7  
PONCHO130's Avatar
PONCHO130
Thread Starter
Member
 
Joined: Nov 2013
Posts: 169
Likes: 0
From: El Valle
Year: 1999
Model: Cherokee
Engine: 4.0
Default
My XJ is a 99
Reply
0

Trending Topics

Old Dec 20, 2013 | 06:47 PM
Share
  #8  
cruiser54's Avatar
cruiser54
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default
No clips that I've ever seen........
Reply
0
Old Dec 20, 2013 | 06:56 PM
Share
  #9  
PONCHO130's Avatar
PONCHO130
Thread Starter
Member
 
Joined: Nov 2013
Posts: 169
Likes: 0
From: El Valle
Year: 1999
Model: Cherokee
Engine: 4.0
Default
So on the 99 model will they just pop off?
Reply
0
Old Dec 20, 2013 | 07:15 PM
Share
  #10  
prcherokee's Avatar
prcherokee
Senior Member
 
Joined: Mar 2012
Posts: 615
Likes: 0
From: FL.
Year: 2000
Model: Cherokee
Default
Post 6 and 8.No they wont. You might break something.

http://www.jeepforum.com/forum/f11/w...removal-84636/
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1996 4.0 into a 2000/01 XJ - Build Thread
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
Sealing rear hatch window
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 4, 2015 11:05 AM
Will crank but wont start
Trevordickya
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 4, 2015 03:28 AM
reliable crank sensor
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 3, 2015 11:03 AM
WTB[PacSoWest]: Window crank, manual mirror, batt bar, 31"
jay_sco
Wanted
0
Sep 2, 2015 06:46 PM
Back to Subforum
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
View Next Unread
Popping When Going Into Gear

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



Advanced Search

All times are GMT -5. The time now is 08:59 PM.