i just a set of clear corner lights and was wondering how to intall them on the side ones i see the screws but on the center ones i dont see screws

 

try taking the headlight door off (the trim piece around the headlight)

 

There are two screws on the top of the head light bezel and then it pulls out. There are two screws that hold the light in place. Once you do that you can pull the light out.

 

hmm i must be looking in the wrong place i dont see the screws for the front ones

 

Ok so it looks like this:



Ok so there are two screw in the top of this bracket one in each corner. Then the two little tabs on the bottom just pop out.

 

ahh i see thank you this doesnt look to complicated

 

Once you get to the light it looks like this:



This is the driver side light. For this side there are two srews. One on the bottom left and the other on the top right. Reverse for the passanger side light. Hope this helps

 

i can just reuse the screws right?

 

yes

 

pics are good for explanations

 

hopefully this install will be as easy as it looks

 

Where did you find clear corner lights anyway and how much were they?

 

i bought them on ebay for about 38 bucks just installed the sides and they look great

 

I bought my clear park lams and corner markers for around twenty bucks at xtralights.com, just thought i would offer that

 

I found a set on e-bay too but haven't bought any yet, waiting on a good deal.