How to Check the front end, What to look for/at ?
#1
Seasoned Member
Thread Starter
Join Date: Aug 2008
Posts: 298
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L
How to Check the front end, What to look for/at ?
I am thinking of a front end overhaul, New tierod ends, ball joints etc. And whatever else is needed. And certainly all the rubber bushings
However as I create a parts list I don't want to miss something important and I am not familiar with what all to check or how??
Other than just grabbing things and checking for play etc. What other methods are used to check front end components ??
However as I create a parts list I don't want to miss something important and I am not familiar with what all to check or how??
Other than just grabbing things and checking for play etc. What other methods are used to check front end components ??
#2
Have an assistant turn the wheel back and forth (quickly) while you look/listen/feel all of the stering components. Pay particul;ar attention to the tracbat TRE's and mounting points at the frame and axle. Watch the trackbar mount (frame side) for movement.
#4
Seasoned Member
Thread Starter
Join Date: Aug 2008
Posts: 298
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L
Just want to get it back up to snuff, It drives pretty good but with a little bit of wandering, But it has 190K on it too.
I'm sure all the rubber is worn out, The PO had records of all the oil changes and lubes so it has at least had regular greasing, Thats a plus !
I'm sure all the rubber is worn out, The PO had records of all the oil changes and lubes so it has at least had regular greasing, Thats a plus !
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-23-2015 07:12 PM
SwankyXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
08-22-2015 09:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)