Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

high idle... again

Old May 23, 2019 | 07:33 AM
  #1  
rockymtnxj's Avatar
Thread Starter
Newbie
 
Joined: May 2019
Posts: 11
Likes: 0
From: Northern Colorado
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0
Default high idle... again

hey everyone, i recently cleaned up my iac sensor because of some random high idling in my 96 xj. it ran perfectly for a week, no high idles, and then today started the same random high idle while in park. could it be my tps? a vacuum leak? any thoughts would be appreciated.
Reply
Old May 23, 2019 | 01:00 PM
  #2  
fb97xj1's Avatar
CF Veteran
 
Joined: Dec 2015
Posts: 3,038
Likes: 338
From: PA
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

Pull the throttle body and clean that, too. The throttle body gasket, if you have one, is a paper gasket. I bought some gasket material from Tractor Supply. It comes in a roll and found it with the switches, etc..An auto parts store should have it, but i never looked there. Remove the TPS, IAC, and the MAP sensor and clean all the ports and passages in the throttle body only using CRC Throttle Body Cleaner. Check all the vacuum lines. There is a port on the side of the MAP sensor. Check that for cracks. Clean the electrical connections for all 3 using electrical cleaner. Let it dry. I use cans of compressed air for electronics to speed that up. Or use an air compressor if you have it. Look for any corrosion or loose pins while you are there. And, just because, clean the engine grounds. Thats where i would start. All easy stuff.
Reply
Old May 23, 2019 | 01:18 PM
  #3  
rockymtnxj's Avatar
Thread Starter
Newbie
 
Joined: May 2019
Posts: 11
Likes: 0
From: Northern Colorado
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by fb97xj1
Pull the throttle body and clean that, too. The throttle body gasket, if you have one, is a paper gasket. I bought some gasket material from Tractor Supply. It comes in a roll and found it with the switches, etc..An auto parts store should have it, but i never looked there. Remove the TPS, IAC, and the MAP sensor and clean all the ports and passages in the throttle body only using CRC Throttle Body Cleaner. Check all the vacuum lines. There is a port on the side of the MAP sensor. Check that for cracks. Clean the electrical connections for all 3 using electrical cleaner. Let it dry. I use cans of compressed air for electronics to speed that up. Or use an air compressor if you have it. Look for any corrosion or loose pins while you are there. And, just because, clean the engine grounds. Thats where i would start. All easy stuff.
thanks for the details, i’ll try that once i get it home tonight!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dschappell
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Dec 23, 2014 09:00 PM
BlueRidgeMark
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Nov 6, 2013 06:19 PM
jrh97007
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Feb 3, 2013 04:21 PM
Hawkman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Dec 13, 2010 10:51 PM
1000jeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Jul 31, 2010 08:55 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:36 PM.