hesco throttle body

Reply Subscribe

Thread Tools

Search this Thread

Feb 13, 2010 | 04:25 PM

Dsandine

Thread Starter

Member

Joined: Jan 2010

Posts: 171

Likes: 0

From: omaha

Year: 1993

Model: Cherokee

Engine: 4.0 Liter H.O.

hesco throttle body

Was getting ready to install hesco throttle body on my jeep, and I noticed it has some kind of vacuum port. (pic enclosed) I imagine it is generic for many years of the 4 liter jeeps, and I have a 93 sport 4 liter. I was just going to cap off the vacuum line, I just figured some of the other years might have a vacuum line that go to throttle body, but on my year jeep there is no vacuum lines going to throttle body, so is just capping it off the right thing to do. Figured I'd ask here cause its better to be safe than sorry.

Feb 13, 2010 | 04:29 PM

89Laredo

CF Veteran

Joined: May 2009

Posts: 10,432

Likes: 64

Year: 2000

Model: Cherokee (XJ)

Engine: 4.0

maybe for the MAP sensor? My renix has a vaccum line going from the TB to the MAP...

Feb 13, 2010 | 04:36 PM

Dsandine

Thread Starter

Member

Joined: Jan 2010

Posts: 171

Likes: 0

From: omaha

Year: 1993

Model: Cherokee

Engine: 4.0 Liter H.O.

My map sensor hook's directly to intake.

Feb 13, 2010 | 06:53 PM

98 JeepJeep

CF Veteran

Joined: Oct 2008

Posts: 2,543

Likes: 5

From: Stafford,VA

Year: 1998

Model: Cherokee

Engine: 4.0

those are Bolt holes and a vacuum fitting for a HO map sensor......

Feb 13, 2010 | 08:49 PM

Dsandine

Thread Starter

Member

Joined: Jan 2010

Posts: 171

Likes: 0

From: omaha

Year: 1993

Model: Cherokee

Engine: 4.0 Liter H.O.

Well I have a 93 and it is a H.O., but the map sensor is on firewall, so should I just cap the nipple off? I can't really move the map sensor unless I got a different mounting bracket and extended wiring harness.