help removing rear pinion seal
Thread Starter
Member
Joined: Mar 2010
Posts: 244
Likes: 0
From: chicagoish
Year: 99
Model: Cherokee
Engine: 4.0
help removing rear pinion seal
i already got the shaft and yoke off and even the rubber part of the seal but the metal part wont budge.... any suggestions?
CF Veteran
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Drill two small holes across from eachother in the seal and screw in some sheet metel screws, then grap the screws with visegrips and yank the seal out.
Senior Member
Joined: Jan 2011
Posts: 957
Likes: 2
From: Russellville, Arkansas
Year: 1991
Model: Cherokee
Engine: 4.0 I-6
You can try and pry it out with a big screwdriver or a crow bar even (I have done both) or you can get the seal removal tool and use a slide hammer.
Thread
Thread Starter
Forum
Replies
Last Post
savagess2546
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Aug 31, 2015 07:50 PM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
Jooman07
Modified XJ Cherokee Tech
25
Aug 28, 2015 02:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)