Help please!!
#1
Member
Thread Starter
Join Date: Aug 2010
Location: Lansing / Ortonville Michigan
Posts: 152
Likes: 0
Received 1 Like
on
1 Post
Year: 1987 / 1994
Model: Cherokee
Engine: 4.0 L6
My brand new hood release cable from rockauto has either stretched or snapped under the hood. The handle is still attached but there is no resistance pulling it and I can't get my hood open. Does anyone know how to get the hood open??? I think this is the last part I will ever buy from them.
Last edited by Mcwille117; 09-21-2012 at 09:54 AM.
#2
Senior Member
That blows! Only way to get it is to start pulling the front off you Jeep, grille, headlights, whatever you can get off. I've had luck getting to it after pulling the headlights out and using a flashlight and a mirror. Good luck!!
#3
Junior Member
You can get to it thru the drivers side headlight bucket.
Either that or cut a big hole in the center of the hood.
Either that or cut a big hole in the center of the hood.
#4
Junior Member
Join Date: Sep 2012
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
I just searched "cherokee hood release broken" and got a ton of answers. Here is a good writeup
http://www.naxja.org/forum/showthrea...highlight=hood
http://www.naxja.org/forum/showthrea...highlight=hood