help! I have death wobble...
#1
Newbie
Thread Starter
Join Date: Feb 2011
Location: New Mexico
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
help! I have death wobble...
I have bad death.wobble at various speeds sometime im turning sometime its on a straight road... Please help I dont know where to start to fix this . Thanks all
#2
Member
Join Date: Mar 2012
Location: manteca
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Start jeep, have someone man the steering wheel.and check ball joints, control arm bushings, trac bar and go.from there... Have them.turn the wheel back and forth while you look... My problem was loose trac bar... Then ball joints... Now control arm bushings... If you get the wobble once, it could wear out all those parts..
Edit... Don't forget alignment... When was it aligned last?
Edit... Don't forget alignment... When was it aligned last?
#4
Member
Join Date: May 2011
Location: Lenexa KS
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Originally Posted by gmv93
most of the times reason is steering stabilizer.
#6
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,914
Received 1,529 Likes
on
1,241 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Read this completely first.
My understanding of "death wobble" is this. Somewhere in the vehicle, one or more components is worn beyond tolerances, and when oscillation initiates from a suspension "traumatic" event (hitting a bump or a pothole) or also when a vibration reaches a certain point and harmonic at a certain speed, it causes theother components to react. This is called the "multiplier effect", where one component affects one or more other components as the event travels through the front end of the vehicle.
Death wobble is not uncommon with the XJ. It is even more common with a lifted XJ. Finding the worn component or components is not always easy. It can sometimes be downright difficult. Sometimes it’s obvious. other times everything appears to be okay when you perform an inspection on a hoist, but getting the vehicle up in the air and going over everything with a fine tough comb is always a good first step. It is very helpful if you know exactly how to perform a comprehensive inspection of every single front end part, looking for abnormal wear and or play in that hardware. If you do not know how to do this type of inspection, pay an experienced professional to do it. Be sure to ask them if they are familiar with "death wobble", as not all technicians are versed in this…..
Check out the below link if you would like some extensive reading on "death wobble" causes and cures. From my research, Kevin (the author of this tutorial) is possibly the best in the business with tracking down root cause of death wobble. He does offer hardware for sale that can help resolve death wobble, but even if you don’t buy any parts from him, you can still get some excellent ideas on what to look at in resolving your death wobble.
http://www.kevinsoffroad.com/how-to-...-death-wobble/
Possible causes of death wobble are listed below. Isolating death wobble is a process of elimination and the root cause is not always obvious and it can often be caused by a combination of things! From my personal experience, I would first concentrate on the track bar and the control arms and associated bushings.
--------------------------------------------------------
-Front tires out of balance (try swapping fronts to rear and see if symptoms change)
-Tire pressure. Don’t laugh. It’s not a root cause but can exaggerate the problem. Experiment with lower tire pressure to see if it helps
-Improper lug nut torque on wheels
-Front alignment out of spec
-Loose track bar
-Worn track bar bushings
-Worn track bar (check for play!!)
-Bad control arms and associated bushings
-Worn/damaged steering stabilizer (not generally a cause in and by itself)
-Worn/damaged shocks
-Worn/damaged tie rod end
-Bad U Joint
-Bad ball joint
-Loose frame mount
-Steering box loose
-Bad front hub assembly
Tom Walker
My understanding of "death wobble" is this. Somewhere in the vehicle, one or more components is worn beyond tolerances, and when oscillation initiates from a suspension "traumatic" event (hitting a bump or a pothole) or also when a vibration reaches a certain point and harmonic at a certain speed, it causes theother components to react. This is called the "multiplier effect", where one component affects one or more other components as the event travels through the front end of the vehicle.
Death wobble is not uncommon with the XJ. It is even more common with a lifted XJ. Finding the worn component or components is not always easy. It can sometimes be downright difficult. Sometimes it’s obvious. other times everything appears to be okay when you perform an inspection on a hoist, but getting the vehicle up in the air and going over everything with a fine tough comb is always a good first step. It is very helpful if you know exactly how to perform a comprehensive inspection of every single front end part, looking for abnormal wear and or play in that hardware. If you do not know how to do this type of inspection, pay an experienced professional to do it. Be sure to ask them if they are familiar with "death wobble", as not all technicians are versed in this…..
Check out the below link if you would like some extensive reading on "death wobble" causes and cures. From my research, Kevin (the author of this tutorial) is possibly the best in the business with tracking down root cause of death wobble. He does offer hardware for sale that can help resolve death wobble, but even if you don’t buy any parts from him, you can still get some excellent ideas on what to look at in resolving your death wobble.
http://www.kevinsoffroad.com/how-to-...-death-wobble/
Possible causes of death wobble are listed below. Isolating death wobble is a process of elimination and the root cause is not always obvious and it can often be caused by a combination of things! From my personal experience, I would first concentrate on the track bar and the control arms and associated bushings.
--------------------------------------------------------
-Front tires out of balance (try swapping fronts to rear and see if symptoms change)
-Tire pressure. Don’t laugh. It’s not a root cause but can exaggerate the problem. Experiment with lower tire pressure to see if it helps
-Improper lug nut torque on wheels
-Front alignment out of spec
-Loose track bar
-Worn track bar bushings
-Worn track bar (check for play!!)
-Bad control arms and associated bushings
-Worn/damaged steering stabilizer (not generally a cause in and by itself)
-Worn/damaged shocks
-Worn/damaged tie rod end
-Bad U Joint
-Bad ball joint
-Loose frame mount
-Steering box loose
-Bad front hub assembly
Tom Walker
#7
Seasoned Member
Join Date: Oct 2010
Location: AnkaraTurkey
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
50
12-26-2023 09:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)