I just droped one the bolts into the holes i know retard anyway to get it out without takeing out engine or tran

 

I would use one of those little magnets on a telescoping stick. That's probably you're only good chance. Grab a whole bunch of magnets and position them on top and then snake the telescoping magnet down and hopefully there will be enough of a magnetic field to draw it up.

 

you should be able to just remove the dust cover. you'll have to remove the starter first tho. once you remove the starter, you may just be able to use the magnet through that hole.

 

Try a shop magnet. Or if you don't have one, make yourself one.
Try using a piece of flexible steel rod with a magnet at the upper end. Stick the lower end in the hole and fish around carefully until it grabs the bolt, then carefully pull it out. JMO

 

So never removed the dust cover any tutorels

 

yep either one lol I would use a magnetic socket for that

 

Just unbolt it. Take the starter off first and unbolt the cover

 

Alright i will do that i mite tighten my bolts while im in there

 

make sure not to do that until you get the other one out lololol

 

Ya I would try the dust cover and just use a magnet or heck if you can get a shop vac in there.

 

My ****ing room mate took my jeep while i was at work he said he heard a wack and it shut off on him ****ing *** hole

 

Why did you reinstall the CPS without getting out that dropped bolt? It wouldn't have been able to start if you had left it off. It's your fault!
Dan

 

No it was the last bolt i had one already in andi droped it in there so i told them my jeep is broken and they still toke it