Help with dash cluster
#1
Newbie
Thread Starter
Join Date: Jan 2019
Location: Downriver
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Help with dash cluster
I'm new to the forum, I have the no bus issue. I did test all the wires but on the dlc pin 3 and 11 I have 120 ohms not 60. I already replaced the wire connector. My pcm is getting power and has ground. I'm also sending 5v out of the pcm on both sides. Any suggestions? Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
Ortiz98cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-09-2018 12:47 AM
Frank92407
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-24-2017 03:24 PM
Firestorm500
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-12-2014 09:20 PM
diskman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-01-2008 10:13 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)