I was trying to test out an electric fan I pulled out of the junk yard because the one in my jeep is bad (bearing) and since it had a different connector on it ( must have been from a pre 97) I had to jump wires over to it from the socket and I think I blew a fuse because now the one that's in there is not working at all.

I can't find the fuse for the elec fan. Does anyone know where it is and if there is even one?

 

on the passenger side engine compartment there is a black box pull cover off under top is fuse location I believe its 40amps my old fan blew mine hope wuch was yours at jy?

 

$18 but the problem is it came from a pre 97 cherokee and i have a 2000 cherokee. I want to use my housing with the fan from the jy but I'm not sure it will fit in the current housing. I got the fan out of the jy housing it was just 3 small bolts. The connector is also a little different but I figured I could splice in the one I have on the one in my jeep now.

Do you know if the older elec fans adapt to the newer housings?

 

@ the bottom of e-fan are 2 tungues that slide into the female parts at bottom of rad. take off e-fan on yours and compare them back to back mine only had 2 bolts @ the top not 3 cant see why it wont fit trial and error?

 

I was able to adapt it! Checked my other thread I explained how I did it.