jgrimm466

i lifted my xj 4.5 inchs. i bought the rough country add aleaf kit. i installed it and it moved my axle over to the left and inch and a quarter. so i lenthened the traction bar and it moved it over about and inch. so the arms are still crooked. and i went and got an alignment and my tires balanced. i drove down the road and hit some small bumps and the hole truck started shaking . i have had 3 balancing and 2 alignments already need help. any ideas how to fix it.

a1racer

welcome to the forum and you have death wobble. i would look for worn bushings track bar lose bad steering dampener and if the track bar does not have the ability to align the axle i would consider getting a new one that does

jgrimm466

alright i willl look at those. thanks

mobilecherokee4

i have the same year same height lift as you and its most likely your track bar thats wat happened too me i didnt even get an alighment its was just the track bar

lil'whiteXJ

Be prepared though, DW can be very hard to track down. Check for ANY play in steering components too. Get under it and have someone move the steering wheel back and forth, look at your tie rod ends, and all the bushings and links. Also check for bent tie rods etc. I would wait to replace the steering stabilizer until you've got the death wobble fixed.

JeepingDan

Aw I just made a thread because I was looking at the same lift. Now I see what to look forward to.

mobilecherokee4

just to let you know it really is as bad as everybody makes it out to be but can be fixed with a little investigation and know how

grn99

You may also want to check the hub assy.(unit bearings).