Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Help

Thread Tools
 
Search this Thread
 
Old Jun 17, 2014 | 06:36 PM
  #1  
Flattire42's Avatar
Thread Starter
Newbie
 
Joined: Jun 2014
Posts: 4
Likes: 0
Model: Cherokee
Default Help

Ok. I need some help here. I have a 92 Cherokee 4.0. It will turn over and run for 2 seconds or so and then shut down. I have put a new IAC valve in and still doing it. Checked all vacuum lines and they are all connected. Any advice as to where I should go from here?
Reply
Old Jun 17, 2014 | 06:43 PM
  #2  
Pelican's Avatar
Senior Member
 
Joined: Mar 2013
Posts: 691
Likes: 2
From: Texas
Year: 1993
Model: Cherokee
Engine: 4.0L
Default

Have you checked the fuel pump ballast resistor? White ceramic unit on driver's side mounted on inside fender. Attach the two leads together or jump with a length of wire. Resistor is to quiet pump but is unneeded and eliminated on later models.
Reply
Old Jun 17, 2014 | 07:21 PM
  #3  
Flattire42's Avatar
Thread Starter
Newbie
 
Joined: Jun 2014
Posts: 4
Likes: 0
Model: Cherokee
Default

Originally Posted by Pelican
Have you checked the fuel pump ballast resistor? White ceramic unit on driver's side mounted on inside fender. Attach the two leads together or jump with a length of wire. Resistor is to quiet pump but is unneeded and eliminated on later models.
Is that in the engine compartment?
Reply
Old Jun 17, 2014 | 07:24 PM
  #4  
FruitSnacks's Avatar
Senior Member
 
Joined: Feb 2014
Posts: 854
Likes: 1
From: Minnesota
Year: 1996
Model: Cherokee
Engine: 4.0
Default

http://www.google.com/imgres?imgurl=...d=0CB4QMygDMAM
Reply
Old Jun 17, 2014 | 07:24 PM
  #5  
Flattire42's Avatar
Thread Starter
Newbie
 
Joined: Jun 2014
Posts: 4
Likes: 0
Model: Cherokee
Default

That did thank you very much
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:06 PM.