Heater switch Question....
Thread Starter
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
So, on the older (pre 97) XJ's, there is a multi-position switch for the heat, for off, low, medium, high. Well, on the XJ, these are notorious for burning up. On mine, it burned up the switch, and the plug on the back of the switch, so even if I got a new switch, the plug is burned up.
I wanted to potentially re-wire it with a 3 position switch with relays to absorb the load, but I do not know how. I was going to use relays to trigger power so any new switches won't burn up. Using a 3 position switch for off, low, and high.
Anyone have knowledge on this system to get this done?
I wanted to potentially re-wire it with a 3 position switch with relays to absorb the load, but I do not know how. I was going to use relays to trigger power so any new switches won't burn up. Using a 3 position switch for off, low, and high.
Anyone have knowledge on this system to get this done?
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
56
Jun 12, 2025 02:04 AM
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Oct 21, 2024 09:27 AM
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Oct 3, 2015 05:46 PM
Silentj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Oct 2, 2015 01:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



