Heater Core Replacement!
Thread Starter
Seasoned Member
Joined: Dec 2009
Posts: 429
Likes: 0
From: Wichita, KS
Year: 1999
Model: Cherokee
Engine: 4.0l I6
I am having 1 hell of a time with this. Any suggestions to make this easier? I was out there for an hour and took off the lower dash portion and most of the screws and cut the strap. It still wont budge and I do see a couple screws I dont seem to be able to get to. The manual said the lower dash is all that needed to be removed... Some help please. Anyone done this?
Seasoned Member
Joined: Jan 2010
Posts: 336
Likes: 0
From: Midlothian, VA
Year: 1996
Model: Cherokee
Engine: 4.0
i had to basically remove the whole dash to get to the heat box out, i did not see any way to get it out the bottom, do you have a/c? maybe thats for one with out a/c
Newbie
Joined: Jan 2010
Posts: 23
Likes: 0
From: North Phoenix, AZ
Year: 1993
Model: Cherokee
Engine: 4.0
There's a really good write up on how to remove the dash, which is what I used when I replaced mine. It was a lot easier to do than I thought it would be... Just make sure you remember exactly where everything goes. I couldn't imagine doing it without removing the entire dash, not only would you need a 12 pack, but a bottle of tylenol too!
Junior Member
Joined: Jan 2010
Posts: 38
Likes: 0
From: Plattsburgh, NY
Year: 200 & 2001
Model: Cherokee
Engine: 4.0
I pulled the entire dash and steering column and went through about 12 beers......I see no other way. Next time I'll buy another jeep! Enjoy. The heat works great now though.
G
G
Thread
Thread Starter
Forum
Replies
Last Post
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Oct 20, 2025 02:48 PM
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 30, 2015 05:42 PM
Brynjaminjones
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 22, 2015 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



