Alright guys, Heres the story. I have a 98 cherokee that ive been working on for awhile. I suspected it had a blown headgasket so A friend said he'd take care of it while i was away. Not the case.

The jeeps back in my garage without pushrods or rocker arms. So heres my questions.

Correct part numbers?

Rocker Arm J3242393 (6)
Bolt, Rocker Arm Pivot 9425708 (12)
Push Rod 33002986 (12)

now for bridges whats the difference?

http://www.quadratec.com/products/51104_53.htm

or

http://www.quadratec.com/products/51103_0202.htm

Ill also be doing an entire upper gasket kit. Anyone partial to brand names and why?

While im in there is there anything else I should be looking at/ changing. The engine only has 17x,xxx kilometres on it

Daniel

 

All i can say, might as well do it all, bearings, piston rings, and oil pump. I just got done doing a full rebuild and all the parts were 390$, including a whole new cam, lifters, and pistons.

 

Do you happen to have a parts list, or take a screen shot of where you ordered from?

 

Let me see if i can find it all, i got parts here and there from places, most of the stuff was from autozone/o reillys