Head differences?
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,933
Received 1,535 Likes
on
1,245 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#4
Newbie
Thread Starter
Join Date: Nov 2013
Location: Laramie, WY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O
I have a block out of my 96 that's is destroyed and I have a 91 block that is good can I take my head from my 96 and put it on the 91
#5
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,933
Received 1,535 Likes
on
1,245 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Yes.
#7
CF Veteran
Join Date: May 2008
Posts: 3,018
Likes: 0
Received 13 Likes
on
13 Posts
Year: 1988
Model: Cherokee
Engine: AMC242
Yes. Deck is the same, intake ports are essentially the same, the #0630 exhaust ports (1996) are slightly smaller than the #7120 (1991) ports, so you won't have any trouble there.
Drop it on and go! Use the 1991 manifold gasket, the head gaskets and valve cover gaskets should be the same.
Drop it on and go! Use the 1991 manifold gasket, the head gaskets and valve cover gaskets should be the same.
Thread
Thread Starter
Forum
Replies
Last Post
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-10-2015 09:06 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)