Burnt up 10 wire connector and both sides and wiring going to fuel pump relay bypassed connector wired direct and new wires going to fuel pump relay tried to start just spins over and no fuel pump has ground to pump no voltage power wire ol ran test wire and pump comes on but wont start ck no spark has voltage and ground to coil but no spark any help would be appetciated thanks hayes manual is all i got

 

Sorry it is a 1990 xj 4.0 auto

 

wow that is painful to read sorry but more people may be willing to help if the post was a little easier to read i understand it is easier to type with no punctuation or anything but it sure is harder to read right

 

Had a fire by battery burned up ten wire connector and wires to fuel pump relay. Repaired wiring. Replaced fuel pump relay and
Wiring. Jeep only spins over and wont start. Fuel pump wont kickn in you can run a wire back
There and pump works. But still wont start ck had no spark at plugs or coil it is a 1990 xj 4.0 auto thanks for your help