hack n tap???
#1
Seasoned Member
Thread Starter
Join Date: Oct 2009
Location: Gaithersburg, MD
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: Inline 6
hack n tap???
first off wat the heck is a hack n tap?? all im used to is the AA sye kit. for someone who is on a budget(like me) is the hack n tap a reasonable choice? is the hack n tap as strong as the AA sye kit? all inputs welcome. thanks.
#3
Junior Member
Join Date: Jul 2009
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0l high output
Just did my H&T fron Iron Rock today. Now that I have done it dont know why you would want to go any other way. Drive line is smooth as butter now!!
#4
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,131
Received 290 Likes
on
239 Posts
Year: 1987 MJ, 1998 XJ, 1973 J2000, 89 waggy
Model: Comanche (MJ)
Engine: 4.0L H.O
hack n tap is when they take a 231 t-case from a 96 or newer cherokee and cut the output-shaft down by a # of inches and then drill and tap the center of the output shaft and then put a pinion hook-up driveshaft hook-up (serious lack of better words) and bolt it to the output shaft of the t-case making it and SYE ready t-case.....
the newer style t-case has a sealed output shaft compared to the cone on the older styles..... very very cheap mod to make it sye ready
please any and all correct me if i'm wrong and toss in your knowledge on the topic
the newer style t-case has a sealed output shaft compared to the cone on the older styles..... very very cheap mod to make it sye ready
please any and all correct me if i'm wrong and toss in your knowledge on the topic
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)