True. I'll keep you posted

 

Replaced coolant sensor in the therm housing. Still no start. Tomorrow I'm going to tool around with the ignition system. Anybody got any other ideas

 

Possible cps

 

already replaced that....that was the first thing i did

 

did you make sure to put a jeep sticker on the back windshield? i had the same iissue until i put the sticker on and after it started right up . to add to that the sticker gave me 15+ hp

 

key on key off check fkr codes yet ?

 

There was a code for the coolant sensor and one for the AC

 

If theres spark and fuel then you should look at timming.

 

isnt the timing not adjustable?

 

i had the same problem timing might be off.http://www.angelfire.com/my/fan/dist_index.html go to link it will help you out.

 

what would cause the timing to go off.....from what i understand it ran fine then all of a sudden it started having problems

 

did you check the coil?

 

That's on the list of things to check next day off

 

Looks like the issue is resolved. The coolant sensor that I got from the zone was reading -40 at all times which was causing the ECM to dump fuel in and flood it. Which also ruined the spark plugs. So OEM coolant sensor and new plugs and starts and runs great.

 

Glad to here u got it running
Let's this thread die