Hi guys...

I'm looking for the gaskets for front and rear windows for my xj of '88 ... can you help me??

Thx

 

Do you have any pictures of the parts needed?

 

My 84, and my 90 windshields are "glued" with vulcanized rubber. I got the tube(s) at the local glass shop. The rear('s) have a gasket. JC Witney?

 

In This morning I will take a photo and i show you the pieces in detail ... thank you so much

 

Great, I'm sure somebody can help. BTW, I meant the front windshield is made that way, installed with a rubber compound. There is no conventional "gasket". The "glue" is concealed under the trim.

 

 

You can get the seals for the door glass at rock auto for about 10 bucks a piece. I would'nt mess with the seal at the divider bar unless I had to because the seal costs about 75 bucks. I pulled mine out not knowing it cost so much and going to try a seal I found at JC whitney. I'll let you know how it fits.

The seals for the door glass are very easy to change. Just roll the window down, pry them out, and you might have to trim the new seals a little and just push them in.

 

Meanwhile, thanks for the answers ... I wanted to ask where you had purchased ... sorry for my bad English

 

https://www.rockauto.com

 

Thank you so much...do you help me for product??thx
There istituto more product and my english istituto very bad!!

 

Please

 

From the pictures shown you need the outer glass seals. Mine are worse then yours lol. This link should put you were you need to be.

http://www.rockauto.com/catalog/racatalog.php

 

thanks a lot!! for the posts instead?



hopefully sent to Italy ...

 

i didnt even see that a link had been posted , you should be able to get those from rock auto also ... but if they dont leak i wouldnt worry about replacing them IMO

 

Many thanks...i send an email to the site...
I inform you if there are any news!!!