Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Fuel Pump issue still.

Thread Tools
 
Search this Thread
 
Old Nov 23, 2011 | 11:29 PM
  #16  
xjtrailrider's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 647
Likes: 0
From: Roanoke VA
Model: Cherokee
Default

Originally Posted by VTJeep
Have you put a code reader on? Even if theres no CEL, there might be something stored in there that will give you a direction. You said it runs better since the TPS was replaced, what about the rest of the ignition stuff- plugs, wires, cap, rotor, good, clean battery leads and wires. And last but not least, o2 sensors... What condition are they in?
No codes on RENIX

I run the Bosch in my 89MJ and 90XJ with no issues but I have the 20 gal tanks. I would think the pumps would be the same. The Bosch is loud as well but I do not run the ballast resistor, its not needed.
Reply
Old Nov 24, 2011 | 08:52 AM
  #17  
BOOM-stick's Avatar
Junior Member
 
Joined: Aug 2011
Posts: 51
Likes: 0
From: nebraska
Year: 1989
Model: Cherokee
Engine: 4.0
Default

The pump from napa was a carter, haven't heard any noise from the pump.
Reply
Old Nov 24, 2011 | 10:54 AM
  #18  
jomps's Avatar
CF Veteran
 
Joined: Apr 2010
Posts: 3,966
Likes: 0
From: knoxville, tn
Year: 2000
Model: Cherokee
Engine: 98 4.0 I6
Default

Originally Posted by BOOM-stick
The pump from napa was a carter, haven't heard any noise from the pump.
yeah my carter works properly
Reply
Old Nov 24, 2011 | 11:49 AM
  #19  
Richieb9's Avatar
Member
 
Joined: Aug 2011
Posts: 113
Likes: 0
From: Mesa, AZ
Year: 1993
Model: Cherokee
Engine: 4.0 liter High Output
Default

well i mean all pumps make a little noise but mine is loud as all get out! so im just going to try and bosch or carter next then. and i will join the hundreds of other that have said Airtek is junk cuz this things sounds like it could blow up any second.
Reply
Old Nov 29, 2011 | 09:23 PM
  #20  
Richieb9's Avatar
Member
 
Joined: Aug 2011
Posts: 113
Likes: 0
From: Mesa, AZ
Year: 1993
Model: Cherokee
Engine: 4.0 liter High Output
Default

Got my bosch today but it didnt come with the mounting bracket. And i no longer have the factory one, so i gotta retrofit it to the airtek bracket... not sure if i should tho...
Reply
Old Dec 9, 2011 | 09:04 AM
  #21  
cheepjeep44's Avatar
Junior Member
 
Joined: Apr 2010
Posts: 61
Likes: 0
From: Tampa
Year: 1987
Model: Cherokee
Engine: 4.0L
Default

I retro fitted my aired aka POS with the Bosch pump. Worked great. Where is the ballast res on an 87?
Reply
Old Mar 15, 2012 | 10:00 AM
  #22  
Kevincs's Avatar
Newbie
 
Joined: Mar 2012
Posts: 1
Likes: 0
Model: Cherokee
Default

Stay away from airtex...cheap made in china junk!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tracyk
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Aug 4, 2021 07:26 AM
Motorbreath8579
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Jul 7, 2016 12:29 PM
DanO55
MJ Comanche Tech. Stock & Modified.
2
Sep 2, 2015 08:31 PM
pinebarrensjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 1, 2015 06:15 PM
DanO55
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Aug 28, 2015 07:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 01:52 PM.