Im in the process of making a new gauge cluster because I had constant problems with my stock one so I just decided to make my own. I already wired up a water temp, tach, and oil preassure. My question is about the gas level gauge. I'm going to buy an aftermarket gas gauge because my old one I lost the needle for it and it will match my other aftermarket gauges. Anyone know what the Ohms specs are for full/half full/empty, because you have to buy the gauge according to the Ohms? Or does anyone have a more detailed wiring diagram showing me what colored wires I need to tap to go into the gauge? Or should I just run a new wire from the sending unit at the tank into my cab? Any help or suggestions is appreciated!

 

Ok I found the right wiring diagram, but I'm uselass at reading these things http://jeepgarage.free.fr/OWN/wiring%20diagrams.pdf

Can anyone help me- which colored wires go to the back of the fuel gague that's all I need to know.

 

let me look ill be right with you

 

do you now now to get a copy of that poasted here fig 6 in the wiring diags it looks like the color is tan pug a17