I have a 97 Cherokee sport. When getting the front wheel bearing off dumb *** me rounded the end of the bolts. I want to replace them but can't find any info on replacement bolts. Anyone know where I can find bolts? or at least what size they are?

M8-1.25x whatever the old ones are (have you gotten one out yet?)

Replace with socket head capscrews - hex heads may be a bit large, and socket heads will be easier to remove.

Thanks for responding….

Got one out but screwed up the other two. Going to get a heat wrench and get them out. For now (since it’s my daily driver) I just put it back together. I needed the bolt size so I can replace them once I get them out.

Just one last question. Are they case hardened?

Case hardened screws of any variety are rare - and usually only found in old firearms anyhow. Most screws are through hardened and tempered.

They have a unique shoulder profile- a dealer only item. I don't know if you need these exact bolts or could use a hardened replacement. If 5-90 says you can use generic bolts, safe to say it's OK. A dealer will charge anywhere from $9 to $10 per bolt.

I just got finished going through wheel bearing hell.

You're talking about the 3 12-point bolts, right? I had to replace mine, and got them from the Chrysler dealer. They didn't have them in stock, but ordered them in 2 days, no problem. List on them is $7 each, but I managed to get them for 4.60 each due to a relative who works there.

Does anyone happen to know the torque specs on those three bolts? The 12-pt 13mm ones that hold the hub on to the spindle?

Edit: never mind, found it. 75lb/ft

Front Axle - Cherokee, Comanche, & Wagoneer torque lb/ft (n.m.)

Axle Shaft Nut ............................. 175 (237)
Disconnect Housing Bolt ...................... 10 (14)
Hub-to-Knuckle Bolt ......................... 75 (102)
Lower Control Arm Bolt ..................... 133 (180)
Lower Shock Mount Bolt ....................... 14 (19)
Drive Shaft Bolt ............................. 14 (19)
Stabilizer Bar Link Bolt ..................... 70 (95)
Tie Rod Nut ............................ 25-45 (34-61)
Upper Control Arm Bolt ....................... 37 (50)
Wheel Lug Nut ............................... 75 (102)