Front signal light wont come one for clearances
09-08-2011, 12:08 AM
#1
Member
Thread Starter
Join Date: Jun 2010
Location: Northern Alberta
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0l
Front signal light wont come one for clearances
I had to change the plug on my 95 for the front bottom signal because the old bulb broke in it and rusted to it. So i swapped in a new pigtail but the wires were all different colors. Now the signal works normal but the light wont come on for clearance. When ever the jeep is running the left signal light stays on and it doesnt turn off and when u signal it goes fast like the lights burnt, but still signals. Any ideas?
09-08-2011, 07:18 AM
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Wires are hooked up backwards?
09-09-2011, 12:12 AM
#3
Member
Thread Starter
Join Date: Jun 2010
Location: Northern Alberta
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0l
found out it was a bad ground, so took the plug apart and added a wire instead of the clip. Tomorrows project is to find out why when i tap the light on the other side it goes on and off ;(
Thread
Thread Starter
Forum
Replies
Last Post
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)