Front end problems
Thread Starter
Seasoned Member
Joined: Mar 2009
Posts: 259
Likes: 0
From: Ohio
Year: 1987
Model: Cherokee
Engine: 4cyl
Long story short
Front drivers side tire fell off while the wife was driving hit the ground for about 10 feet. checked the ball joints etc..... all seemed good
the jeepie used to drive fine at 65-70 now I can't hit 50 without a bad shake (not the death wobble)
next thing Im thinking is belt on the tire/alignment
How can I tell is the a-frame is bent ?
Anyone have an idea what all I can check ?
Front drivers side tire fell off while the wife was driving hit the ground for about 10 feet. checked the ball joints etc..... all seemed good
the jeepie used to drive fine at 65-70 now I can't hit 50 without a bad shake (not the death wobble)
next thing Im thinking is belt on the tire/alignment
How can I tell is the a-frame is bent ?
Anyone have an idea what all I can check ?
Long story short
Front drivers side tire fell off while the wife was driving hit the ground for about 10 feet. checked the ball joints etc..... all seemed good
the jeepie used to drive fine at 65-70 now I can't hit 50 without a bad shake (not the death wobble)
next thing Im thinking is belt on the tire/alignment
How can I tell is the a-frame is bent ?
Anyone have an idea what all I can check ?
Front drivers side tire fell off while the wife was driving hit the ground for about 10 feet. checked the ball joints etc..... all seemed good
the jeepie used to drive fine at 65-70 now I can't hit 50 without a bad shake (not the death wobble)
next thing Im thinking is belt on the tire/alignment
How can I tell is the a-frame is bent ?
Anyone have an idea what all I can check ?
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 23, 2015 07:12 PM
SwankyXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Aug 22, 2015 09:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



