front end noise
#1
Newbie
Thread Starter
Join Date: Jul 2010
Location: surrey bc, canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
front end noise
hello and thanks to all.
i have a 88 cherokee noise on front left when driving.replaced axel u-joint,shot but still same.replaced hub assembly,same.vibration under feet when driving,noise still. removed front ds,still there. diff problem ?pinion bearing ? dana 30 diff only one hose and it runs up to fire wall and is capped.
thanks for any help
i have a 88 cherokee noise on front left when driving.replaced axel u-joint,shot but still same.replaced hub assembly,same.vibration under feet when driving,noise still. removed front ds,still there. diff problem ?pinion bearing ? dana 30 diff only one hose and it runs up to fire wall and is capped.
thanks for any help
#2
Seasoned Member
Join Date: Jul 2010
Location: Central Florida
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Welcome Newbie!
The hose is a vent tube for the axle. Your problem could be almost any thing in the fount end. Start by getting under it and checking for any thing loose. This means putting as much force as you can on each part of the suspension and linkage, if this does not turn up anything tighten every nut/bolt you can. These type problems have no direct answer. Good luck!
The hose is a vent tube for the axle. Your problem could be almost any thing in the fount end. Start by getting under it and checking for any thing loose. This means putting as much force as you can on each part of the suspension and linkage, if this does not turn up anything tighten every nut/bolt you can. These type problems have no direct answer. Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-23-2015 07:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)