I was wondering how i could take off the front bumper and make it appear as this one does (picture below) is there anything that i would have to relocate or do i just take off the bumper and thats that.

Thanks in advance!

 

Be careful if you do that to a truck that is your DD, most states have laws that require front/rear bumpers. If it's your toy, go nuts.

 

there is no bumper in the one pictured. so taking your bumper off would result in that outcome. and like said, its usually illegal to have no bumpers.

 

Nope it is simple, on a stock bumper with no tie in's there are 3 bolts on each side ( 13mm i believe not sure ) there easy to get to and once the 6 total bolts are removed you are fine, keep in ming the vacuum pump on the passenger side,
you can pull it into the engine bay and zip tie it some were though

 

The look is cool, but if you ever hit anything its all over, go aftermarket...

 

AGREED....