front axle u joints
#1
Junior Member
Thread Starter
front axle u joints
are the front axle u joints the same on both sides?im getting conflicting part numbers at parts stores? did jeep use different size bearing caps on left vs right sides? its a 96, dana 30 axle.
#2
CF Veteran
no. not different sizes from left to right. they are the same u-joints.
but, the earlier models had two different size joints for select trac and command track models. this ended in either 95 or 96 when chrysler just went with the larger 297x joints.
the earlier command track used 260x joints and select trac all used the 297x.
but, the earlier models had two different size joints for select trac and command track models. this ended in either 95 or 96 when chrysler just went with the larger 297x joints.
the earlier command track used 260x joints and select trac all used the 297x.
#4
CF Veteran
you are correct. pre 95 with command trac used the smaller 260x joints.
if you had select trac with abs, you would have had the larger 297x joints.
Thread
Thread Starter
Forum
Replies
Last Post
97grand4.0
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
09-04-2016 12:59 PM
Putttn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
08-29-2016 04:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)