Front axle problems what should I do?
#1
CF Veteran
Thread Starter
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
Front axle problems what should I do?
Found my wheel bearings and U joints on the front axle were bad. This is to be expected when running 33's. But im wondering what route I should go here are the options I can think of tell me what you think or maybe sugest one of your own.
Oh and money is quite tight so tring to save but yet do it right.
Option 1) Get new wheel bearing and U joints and just install them.
Option 2) Get rid of my LP dana 30 for a HP one and hopefully find one at the junkyard that is in good shape.
What do you guys think? Also let it be known I have stock gears, Just did brakes on this axle (I could transfer those).
Oh and money is quite tight so tring to save but yet do it right.
Option 1) Get new wheel bearing and U joints and just install them.
Option 2) Get rid of my LP dana 30 for a HP one and hopefully find one at the junkyard that is in good shape.
What do you guys think? Also let it be known I have stock gears, Just did brakes on this axle (I could transfer those).
#2
Senior Member
well the HP axle isn't any stronger so that would just be for driveline angles but you could find one for less than the new parts and put it in for a savings in $$, but I would just change the bearings and u joints. It takes me less than an hour to do them both, but if the u joints have never been changed be careful not to bend the yokes pressing them apart!!!!
#4
Senior Member
Join Date: Mar 2009
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 H/O I6
Trending Topics
#8
Newbie
Join Date: Mar 2010
Location: reno
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0ho
yeah i have the hp and its great i have put the thing through a living hell with 35s and had no problems so you should be good man i would say when you get it to do the zj tire rod from the v8 it helps haha
#9
CF Veteran
Join Date: Jan 2010
Location: Indianola IOWA
Posts: 2,059
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
well the HP axle isn't any stronger so that would just be for driveline angles but you could find one for less than the new parts and put it in for a savings in $$, but I would just change the bearings and u joints. It takes me less than an hour to do them both, but if the u joints have never been changed be careful not to bend the yokes pressing them apart!!!!
#10
CF Veteran
Thread Starter
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
Okay im gonna start my search for a good HP with good bearings and Joints and hasnt been sitting for too long. Once I find one clean it up. My shop teacher said we could stiffen it up a bit as in the CA mounts and maybe a brace. Anything I should look for in an axle other than fluid, Bearings, Ball joints?
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-30-2024 08:59 AM
Hewittxj
Modified XJ Cherokee Tech
35
08-31-2015 04:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)