I got some new driving lights for the jeep they are the BAJA tough ones from wal-mart, i was wanting to use the stock wiring from the old ones to keep things clean but there is no power to the wires. When you flip the switch inside the indicator light turns on but there is no juice up front. I checked the fuse under hood and it is not burned out. Is there anything else i should check? And if there is a relay where would it be located at.

 

its a bad switch more than likely,mine was the same exact way,the switch lights up but won send power,but just fallow the wires as far as u can and check if they're still good