Fog light help, Please.
#1
Seasoned Member
Thread Starter
Join Date: Nov 2009
Location: PA
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Fog light help, Please.
My 95 has factory fog lights. Factory switch and all. PO put Hellas on it. he wired them to come on while the high beams are on, and the switch on,of course. They worked last night. now they dont. I checked #17 fuse and aux light fuse for continuity. all good. The switch lights up on all headlight settings except high beams now. When I select high beams the switch light goes out and the fog lights dont come on. Any thoughts would be greatly appreciated. Thanks. I hate wires.
#2
Seasoned Member
Join Date: Jul 2010
Location: Central Florida
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I would check the grounds, when the light goes out that says to me a lack of power. Remember that positive current flows to negitive ground. If you are using the factory grounds from the factory lights this may not be strong enough for higher powered hellas, run a new ground to unpainted metal.
#3
Seasoned Member
Thread Starter
Join Date: Nov 2009
Location: PA
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Thanks
Im going to check now. the ground is tight, but like you said a larger ground on a better surface may be needed. it is on a painted surface too. And yes those Hellas are powerful. I couldnt believe how bright they were.
#5
Seasoned Member
Join Date: Jul 2010
Location: Central Florida
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Never never ground to a painted surface, scrap the paint off or sand. Grounds will cause all kinds of problems if not correct.
#6
Seasoned Member
Thread Starter
Join Date: Nov 2009
Location: PA
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Replaced a fuse on the small headlight block.
They work with the switch on or off when hi beams are on now. AHH. Switch?
#7
Seasoned Member
Join Date: Jul 2010
Location: Central Florida
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I dont understand how the lights could be power by the high beams but also interupted by the factory fog light switch. I think the best thing to do would be to Wire the lights to the battery and use the factory fog light switch to power a relay. This will eliminate one variable and will also give you the option to use the fog light with any headlight configuration.
Trending Topics
#9
Seasoned Member
Thread Starter
Join Date: Nov 2009
Location: PA
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Thanks for the clues.
It isnt fixed yet. Ive chased almost every inch of wire. it does look the same guage wire as what comes out of the lights. Now In probably take the dash out and pull the switch. check it. decide from there., all Ive seen is solid, so far.
Thread
Thread Starter
Forum
Replies
Last Post
RyanHardin1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-10-2015 08:21 AM
BillyBoy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-08-2015 10:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)