Flywheel
10-12-2010, 08:26 PM
#1
Member
Thread Starter
Join Date: Mar 2010
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Flywheel
I think I may have found my issue with no spark and wanted to run it by you folks.
Recently, I swapped the block out of our 87 Cherokee for a block out of a 96. I put the flywheel from the 96 in, but everything else is from the 87.
Are the flywheels different? Could that be casuing this problem?
Recently, I swapped the block out of our 87 Cherokee for a block out of a 96. I put the flywheel from the 96 in, but everything else is from the 87.
Are the flywheels different? Could that be casuing this problem?
10-12-2010, 09:30 PM
#2
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
You might be correct.. iirc the flywheel on an OBDII has the CPS pickups at a different depth. The CPS being basically a magnet i'm sure it's not picking up the signal correctly.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
jhamXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
11-09-2021 08:20 AM
travellinmike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-11-2015 05:11 PM
mattinky
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
06-04-2010 10:02 AM
xjbuddy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-24-2009 08:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)