Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

First budget lift, couple questions

Thread Tools
 
Search this Thread
 
Old Oct 17, 2010 | 11:44 AM
  #1  
phoenix901223's Avatar
Thread Starter
Seasoned Member
 
Joined: May 2010
Posts: 406
Likes: 0
From: Suffolk long island
Year: 1994
Model: Cherokee
Engine: 4.0 L I6
Default First budget lift, couple questions

Im thinking about doing some lifting on my jeep, and i want to keep it kind of cheap. Im thinking about going up about 2 inches, i want to be able to comfortably fit 245/75s. Ive been doing some research and i see a whole bunch of options between spacers, blocks, springs etc etc. Im not looking to dig through junkyards, around here they wanted 45$ for a used headlight...I think id rather order some parts online. but my question is...What would you guys recommend I should get for my first budget lift...Im not trying to spend any more than two hundred dollars :x

Sorry if this question has been beat to hell, i searched it and couldn't find any answers i was really looking for.
Reply
Old Oct 17, 2010 | 11:47 AM
  #2  
EvilMaster's Avatar
Member
 
Joined: Apr 2009
Posts: 242
Likes: 1
From: Canada
Year: 2000
Model: Cherokee
Engine: 4.0L (242 CID) I6 MPI "Power Tech"
Default

http://www.quadratec.com/products/76016_820.htm
Reply
Old Oct 17, 2010 | 12:33 PM
  #3  
Irongrave's Avatar
CF Veteran
 
Joined: Mar 2008
Posts: 2,266
Likes: 9
From: Florence SC
Year: 1996
Engine: 4.0
Default

i personally like ZJ V8 springs and a rear shackle but that's just me
Reply
Old Oct 17, 2010 | 12:43 PM
  #4  
phoenix901223's Avatar
Thread Starter
Seasoned Member
 
Joined: May 2010
Posts: 406
Likes: 0
From: Suffolk long island
Year: 1994
Model: Cherokee
Engine: 4.0 L I6
Default

Thats all you need, is ZJ springs and rear shackles? Hows the ride quality..

And does it matter what years/Engine size for the V8? i know they made the 5.2 and another bigger one..

Last edited by phoenix901223; Oct 17, 2010 at 12:46 PM.
Reply
Old Oct 17, 2010 | 12:58 PM
  #5  
Irongrave's Avatar
CF Veteran
 
Joined: Mar 2008
Posts: 2,266
Likes: 9
From: Florence SC
Year: 1996
Engine: 4.0
Default

little stiffer then stock you'll want to pick up new longer shocks as well
Reply
Old Oct 17, 2010 | 03:14 PM
  #6  
phoenix901223's Avatar
Thread Starter
Seasoned Member
 
Joined: May 2010
Posts: 406
Likes: 0
From: Suffolk long island
Year: 1994
Model: Cherokee
Engine: 4.0 L I6
Default

If i go with the plastic spacers, will i have to get new shocks? Mine are almost shot right now, but i eventually want to get up to a 3inch with all new springs shocks etc. Can I get shocks that would work with three inches of lift and laso work with the 2 inch, and how long would they be. And whats a good brand?
Reply
Old Oct 17, 2010 | 03:19 PM
  #7  
Tacedaddy's Avatar
Newbie
 
Joined: Jun 2010
Posts: 21
Likes: 0
From: Staunton/Winchester
Year: 1990
Model: Cherokee
Engine: 4.0
Default

If your only doing two inches your stock shocks will be fine. Unless you are doing a ton of flexing stock shocks can handle up to 3inches. if you do blocks up front and S10 procomp AAL's in the back you your looking at about $85 on ebay
Reply
Old Oct 17, 2010 | 03:27 PM
  #8  
phoenix901223's Avatar
Thread Starter
Seasoned Member
 
Joined: May 2010
Posts: 406
Likes: 0
From: Suffolk long island
Year: 1994
Model: Cherokee
Engine: 4.0 L I6
Default

When you say blocks i assume you mean the polyurethane spacers?
Reply
Old Oct 17, 2010 | 03:44 PM
  #9  
tomcarey88's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 676
Likes: 0
From: delaware.milton
Year: 1996-1997
Model: Cherokee
Engine: I-6,4.0-246000+miles
Default

i have spacer in front block an shackle in rear..the block sits between the spring an axle....with 33s
Reply
Old Oct 17, 2010 | 04:00 PM
  #10  
93~~XJ's Avatar
Junior Member
 
Joined: Sep 2010
Posts: 70
Likes: 0
From: Denver, CO
Year: 1993
Model: Cherokee
Engine: 4.0
Default

Originally Posted by phoenix901223
Sorry if this question has been beat to hell, i searched it and couldn't find any answers i was really looking for.
https://www.cherokeeforum.com/search...archid=1325798
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rc3797
Jeep Builds
3
May 6, 2016 08:53 PM
98XJSPORTSATINJADED
Cherokee Chat
22
Jan 5, 2016 09:38 PM
xjmachine
Fabrication & builders section.
25
Sep 27, 2015 08:22 AM
studmuffin
Cherokee Chat
16
Sep 16, 2015 07:52 PM
marcy_1990
Introductions
9
Sep 1, 2015 01:27 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:29 PM.