Finally got the 33's put on...
#1
Seasoned Member
Thread Starter
Join Date: Sep 2008
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Model: Wagoneer
Finally got the 33's put on...
Got 4 SSR TSL's 33x12.5 on 15'' RockCrawler wheels put on that I picked up for 800 bones w/95%thread left just gotta do some more trimming... Its sitting on 3.5'' of lift right now but going to add a 1/5'' spacer/shackle setup in a few months
Last edited by aircrewallan; 06-11-2012 at 08:31 PM.
#3
Seasoned Member
Thread Starter
Join Date: Sep 2008
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Model: Wagoneer
thanks! and nope, gonna try it out this Thursday hopefully but need to trim alittle more in the front before then and figure out some kinda extra bumpstop idea...
#4
Looking good..... I got a '92 with a 4.5 lift and still trying to figure out how and where to cut the fender. Could you post some pictures if you have any or write some instructions on where to cut it.
Trending Topics
#10
Member
Join Date: Feb 2009
Posts: 159
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0H.O. I6
Dang, just when I was sure I was going to downsize to 31"s when I get around to redoing my lift, you go and post a pic of what mine could look like if I kept 33's lol.
Looks great though. I would love to see what it looks like flexed out.
Looks great though. I would love to see what it looks like flexed out.
#11
Seasoned Member
Thread Starter
Join Date: Sep 2008
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Model: Wagoneer
well first off its a RE 3.5'' SuperRide w/full leafs and as for the trimming...I was scared to death to do it lol but hey its not yours until you cut something up lol anywayz - take off your stock fenders (mutilple long bolts on the inside of the wheel well) then youll see that you can pretty much anywhere you want on the front. I decided to keep the lip on the front but now i have to get rid of it becuz of the 33's but i also removed the splash guards that "make up to wheel well" just make sure not to cut the windshield washer tank and the back was the basic cut inbetween the pinch welds and fold...just DONT CUT TOO HIGH! they will still roll under if you dont cut all the way up lol I made that mistake on a few cuts but with some paint you can hardly tell and once you take off the bolts for the back if it seems like its still stuck on there lightly hit the plastic panel to the REAR and it will slide backwards. As for flexin - Im hopefully going to some trails on Thursday so Ill post some pics of the action!